Real-Time Remote Replication 2-Way Sync: Synchronize Shared Folders Between 2 Nas Units

I – Does Qnap Supports Controller Device Or Active-Active Setup For Non-Stop Working? Nope, But You Can Setup 2-Way-Sync For Non-Stop Storage Sytem

II – How To Setup 2 Way Sync

III – Rename Conflicted File

IV – Replace Conflicted File

.

I – Does Qnap Supports Controller Device Or Active-Active Setup For Non-Stop Working? Nope, But You Can Setup 2-Way-Sync For Non-Stop Storage Sytem

Here İs Qnap 2-Way Sync Scenario;

2 way sync

If One Qnap Fails, Clienst Doesnt Have To Sto Working and Can Continue Working On Other Qnap;Qnap 2 Way sync if one device fails

Clients Doesnt Have To Work On One Device Because Qnap Does 2 Way Sync;Qnap 2 Way sync plan

.

II – How To Setup 2 Way Sync

1 – At backup managment, enable RTRR, enter password and press apply button on both Qnap you have.

Before 2 way sync

.

2 – Go to RTRR Backup and press “Create a Replication Job” Qnap 2 way sync 1

.

3 – Select 2-Way Sync;Qnap 2 way sync 2

.

4 – Enter other Qnap IP adress, password and press “Test” button;Qnap 2 way sync 3

.

5 – Select your files to backup at the left side, and where to backup on right side;Qnap 2 way sync 4

.

Qnap 2 way sync 5

.

6 – Setup time sync. (you can select miminum 5 minutes)

Qnap 2 way sync 6

.

7 – Select “Who wins for confclicted files” option. For this scenario, my advice is “Newer file wins” Qnap 2 way sync 7

.

8 – Select File Type To Backup;

Qnap 2 way sync 8

.

III – Rename Conflicted File

Rename conflicted file 5

.

Rename conflicted file 6

.

Rename conflicted file 7

.

IV – Replace Conflicted File

Replace Local File 1

.

Replace Local File 2

.

Replace Local File 3

.

VN:F [1.9.22_1171]
Rating: 9.5/10 (4 votes cast)
VN:F [1.9.22_1171]
Rating: +2 (from 2 votes)
Real-Time Remote Replication 2-Way Sync: Synchronize Shared Folders Between 2 Nas UnitsGerçek Zamanlı 2 Yönlü Senkronizasyon: İki Qnap Arasında Klasörlerinizi Senkronize Edin , 9.5 out of 10 based on 4 ratings

6 Responses to Real-Time Remote Replication 2-Way Sync: Synchronize Shared Folders Between 2 Nas Units

  1. Kenny says:

    I have set up a 2-way RTRR between two Qnaps. It works in general, but there is a problem: deleted folders keep reappearing unless I don’t delete them on both Qnaps. Same thing if I rename a folder on only one Qnap – after the next sync I have both the renamed and the original folder back. Although I selected “delete extra files”. Any idea why this happens?

  2. Npmk says:

    Did you solved it yet?
    I am going to buy also two NAS for georedundant sync and what you describe is a no-go.

  3. burado51 says:

    Hi, havent heard this problem from any costumer so, maybe something wrong with firmware. Did you try to upgrade it? (Dont install 4.1.1, stand on 4.1.0 and try to reinstall 4.1.0 back again)

    Also did you try to contact with offical Qnap support team @ http://www.qnap.com ? They can check and maybe solve problem with remote connection.

  4. Jasper Kemp says:

    I also have this exact same problem. Does anybody have a solution already?
    I added a case at QNAP support but no response yet…

    Dear support,

    one of our customers has two sites (Netherlands and France) with two TS-469 Pro’s.
    They are using multiple RTRR 2way sync jobs to update the data on both locations.

    The problem is when a file is deleted, some time later it automatically comes back.
    When the file is deleted, a new file is added by user, the RTRR job restores a renamed file in the same folder.
    On all the 2way sync jobs the Conflict Policy is set on ‘Newer files win’.

    What is causing this problem and how can we resolve this.

  5. zack says:

    +1

    I have a pair of TS-421′s at two locations (one primary, one secondary) and am using RTRR to do two-way remote replication.

    Same problem here – but this problem just appeared since the last update.

    Users can delete files from the primary, but they reappear once RTRR runs. It used to be that deleting from the primary would delete it from the secondary too. But something has changed.

  6. Peter says:

    Any news on this issue on replicating a delete operation onto the second QNAP under two-way-synchronisation, especially when using QTS 4.12?

Leave a Reply to burado51 Cancel reply

Your email address will not be published. Required fields are marked *

You may use these HTML tags and attributes: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong>