Eski Qnap Firmware’ini Nasıl Geri Yükleyebilirsiniz

I – How To Downgrade Qnap Firmware To Older Version?

II – Why I Cant Downgrade Ts-531P Series Firmware? How To Downgrade Qnap Firmware To Older Version?

III – How to Downgrade From 4.0.4 / 4.0.5 Firmware

IV- How To Downgrade Firmware If No HDD’s Installed

.

I – How To Downgrade Qnap Firmware To Older Version?

To Downgrade the firmware of your NAS manually, follow these steps:

1 – Verify the model name and firmware version of your NAS

Log into your NAS as an administrator (use the admin account, or a user account belonging to the administrator group) and go to “Control Panel” > “System Status”, and click the “System Information” tab. This page displays the model name and firmware version in addition to other information about the system.

.

2 – Download the older firmware

1. Go to the QNAP website (http://www.qnap.com/download) and select your NAS model.
2. Select “Firmware”, and find the desired firmware version. Click on the “Note” icon  to read the release notes for the selected firmware version. The release notes will contain specific instructions that may apply.

.

3 – Downgrade your NAS firmware Via Qfinder;

1. Launch Qfinder Pro.
2. Click “Tools” > ”Update Firmware”.
3. Select “Path of the system firmware image file” and show older firmware image file (you must unzip firmware after download, and show .iso file here

.

II – Why I Cant Downgrade Ts-531P Series Firmware? How To Downgrade Qnap Firmware To Older Version?

Problem;

To Downgrade Qnap Firmware;

We use TS-531P firmware;
https://www.qnap.com/en/product_x_down/product_down.php?II=210 [^]

And TS-531X/TS-831X firmware;
https://www.qnap.com/en/product_x_down/product_down.php?II=260 [^]

Both fails via Qfinder & Qnap Interface.

.

Reason;

It’s because model name definition is changed in 4.3.2.

.

How To Solve?

You can downgrade firmware with command lines;

https://wiki.qnap.com/wiki/Manually_Updating_Firmware

.

III – How to Downgrade From 4.0.4 / 4.0.5 Firmware

Please try below steps to downgrade.

Warning: If any new storage pool or data volume was created on 4.0.4/4.0.5 Firmware, it will be lost after downgrade.

1. Download the 3.8.4 Firmware file from http://www.qnap.com/download

2. Unzip file and put file under Public Folder on Qnap

3. Connect to the NAS on SSH (download putty and login your Qnap)

4. Type the command:

touch /etc/ignore_degrade_check

5. Follow the wiki guide to manually install the 3.8.4 firmware:

[Two important checks]

(1) Please make sure there is /mnt/HDA_ROOT/update folder.

If it does not exist, create it using

# mkdir /mnt/HDA_ROOT/update

(2) Confirm no /mnt/update file or folder.

If it exists, you need to delete it using:

# rm -rf /mnt/update

if you get a message saying:

“rm: unable to remove ‘/mnt/update’: Device or resource busy”, unmount the folder and try the rm line above again. To unmount use:

# umount /mnt/update

After the above two checks, execute the commands below to perform the update.

1. Copy the image file to the normal update location:

   # mv /share/Public/TS-209_2.1.2_build1031.img /mnt/HDA_ROOT/update/

2. Create a link to the /mnt/update location:

   # ln -sf /mnt/HDA_ROOT/update /mnt/update

3. Run the update script:

   # /etc/init.d/update.sh /mnt/HDA_ROOT/update/TS-209_2.1.2_build1031.img

Note while the update script runs, you will get some output feedback in the terminal, similar to the following.

6. Results Should be like this. You must reboot Qnap device after this firmware upgrade / downgrade

Resource: http://wiki.qnap.com/wiki/Manually_Updating_Firmware

.

IV – How To Downgrade Firmware If No HDD’s Installed

How to Fix;

1 – NAS Firmware Update When No HDD(s) Installed

From QNAPedia

NOTE:

Download link of the flash image:

TS-110

http://us1.qnap.com/Storage/tsd/flashimage/TS-110_20120302-3.6.1.Flash.img

TS-112

http://us1.qnap.com/Storage/tsd/flashimage/TS-112_20120302-3.6.1.Flash.img

TS-119, TS-119P+, TS-119PII

http://us1.qnap.com/Storage/tsd/flashimage/TS-119_20120302-3.6.1.Flash.img

TS-210

http://us1.qnap.com/Storage/tsd/flashimage/TS-210_20120302-3.6.1.Flash.img

TS-212

http://us1.qnap.com/Storage/tsd/flashimage/TS-212_20120302-3.6.1.Flash.img

TS-219, TS-219P, TS-219P+, TS-219PII

http://us1.qnap.com/Storage/tsd/flashimage/TS-219_20120302-3.6.1.Flash.img

TS-410

http://us1.qnap.com/Storage/tsd/flashimage/TS-410_20120302-3.6.1.Flash.img

TS-410U

http://us1.qnap.com/Storage/tsd/flashimage/TS-410U_20120302-3.6.1.Flash.img

TS-412

http://us1.qnap.com/Storage/tsd/flashimage/TS-412_20120302-3.6.1.Flash.img

TS-412U

http://us1.qnap.com/Storage/tsd/flashimage/TS-412U_20120302-3.6.1.Flash.img

TS-419P, TS-419P+, TS-419PII

http://us1.qnap.com/Storage/tsd/flashimage/TS-419P_20120302-3.6.1.Flash.img

TS-419U, TS-419U+, TS-419UII

http://us1.qnap.com/Storage/tsd/flashimage/TS-419U_20120302-3.6.1.Flash.img

TS-239

http://us1.qnap.com/Storage/tsd/flashimage/TS-239_20120302-3.6.1.Flash.img

TS-439

http://us1.qnap.com/Storage/tsd/flashimage/TS-439_20120302-3.6.1.Flash.img

TS-439U

http://us1.qnap.com/Storage/tsd/flashimage/TS-439U_20120302-3.6.1.Flash.img

TS-639

http://us1.qnap.com/Storage/tsd/flashimage/TS-639_20120302-3.6.1.Flash.img

TS-509

http://us1.qnap.com/Storage/tsd/flashimage/TS-509_20120302-3.6.1.Flash.img

TS-809

http://us1.qnap.com/Storage/tsd/flashimage/TS-809_20120302-3.6.1.Flash.img

TS-809U

http://us1.qnap.com/Storage/tsd/flashimage/TS-809U_20120302-3.6.1.Flash.img

SS-439

http://us1.qnap.com/Storage/tsd/flashimage/SS-439_20120302-3.6.1.Flash.img

SS-839

http://us1.qnap.com/Storage/tsd/flashimage/SS-839_20120302-3.6.1.Flash.img

2 – Update Procedures:

1. Power off the NAS
2. Remove all the HDDs
3. Power on the NAS
4. After a short beep and a long beep(about two minutes after first short beep), run the QNAP Finder(Make sure the Finder is the latest version).
5. QNAP Finder should find the NAS and its IP
6. Select the NAS and click “Tools” -> “Update Firmware”

1. Input default username and password (admin/admin)
2. Select the image files on your PC for the NAS.

1. After firmware update, the NAS will be reboot.
2. Make sure the firmware have been updated
3. Power off the NAS
4. Plug all the HDD back
5. After power on, follow the messages on the Finder to initialize the NAS.

From : http://wiki.qnap.com/w/index.php?title=NAS_Firmware_Update_When_No_HDD(s)_Installed