Qnap’taki Bozulan .conf Dosyasını Düzeltme İşlemi;

I – Easy Way To Recover/Fix Corrupted .conf File On Qnap

II – Hard Way To Recover/Fix Corrupted .conf File On Qnap

.

I – Easy Way To Recover/Fix Corrupted .conf File On Qnap

1. wget http://download.qnap.com/Storage/tsd/utility/qck

2. chmod +x qck

3. ./qck restore_conf

4. cp /mnt/HDA_ROOT/.conf_restore /mnt/HDA_ROOT/.conf

*Thanks for Daniel from Qnap!

.

II – Hard Way To Recover/Fix Corrupted .conf File On Qnap

Appendix: How to recover .conf (md9 fail to auto-assemble)

• Try to mount 1st partition of any disk
  1. Please open /etc/enclosure_0.conf to get the correct disk mapping name.

[PhysicalDisk_1]

port_id=1

pd_sys_id=sg6

enc_sys_id=root

pd_sys_name=/dev/sdg

1. Example command of mount Disk1 1st partition.
   [~] # /bin/mount /dev/sdg1 /mnt/sdg_root

• Try to read /mnt/sdg_root/.conf
  [~] # cat /mnt/sdg_root/.conf

• It should be a valid text file. If .conf file is is garbled, remove it and try to re-generate it.

• Example of HAL support firmware(SMB):
  1. MAC address 1: 00:08:9B:CB:A3:EA
  2. World wide name of DISK1: 50014EE25C0D43B9
  3. World wide name of DISK2: 5000C5004EE02CCB
  4. World wide name of DISK3: 5000CCA378EF2455
  5. World wide name of DISK4: 50014EE2B21AEE7C
  6. To get the correct disk WWN, please refer to /etc/enclosure_0.conf.

[~] # cat /mnt/sdg_root/.conf
hw_addr=00:08:9B:CB:A3:EA
QNAP=TRUE
mirror=0
hal_support=yes
sm_v2_support=yes
pd_dev_wwn_50014EE25C0D43B9=0×1
pd_dev_wwn_5000C5004EE02CCB=0×2
pd_dev_wwn_5000CCA378EF2455=0×3
pd_dev_wwn_50014EE2B21AEE7C=0×4

• Mount each disk 1st partition
• Copy this new .conf to each disk 1st partition

[Note] You can use below tool to generate new .conf file in /mnt/HDA_ROOT/.conf_restore:

1. wget http://download.qnap.com/Storage/tsd/utility/qck

2. chmod +x qck

 

3. ./qck restore_conf

How To Recover Corrupted .conf File On QnapQnap'taki Bozulan .conf Dosyasını Düzeltme İşlemi;, 9.5 out of 10 based on 2 ratings